The KTM 300 XC-W is one of the most recognized names at the sharp end of hard enduro. With a bulletproof, fuel-injected 2-stroke engine churning out masses of low-down torque and top-end fury, it's the ideal companion when tackling challenging terrain. Now with all-new suspension, a new frame and fresh bodywork, the 2024 KTM 300 XC-W is ready to take on the world's toughtest enduro terrain.

Features may include:

PREPERATION MAKES PERFECT

SETTING THE SAG

Adjustability

Getting READY TO RACE has never been easier. Thanks in part to its all-new suspension, the 2024 KTM XC-W range boasts totally tool-free suspension setup at both ends. At the rear, the all-new shock absorber design features hand-adjustable dual compression control, allowing riders to adjust high- and low-speed settings in a matter of seconds. On the front, the forks are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and on the fork top cap, allowing riders to change settings on the fly without the need for any tools.

DEEP BREATH

Air filter box

Maximum airflow with minimal water intrusion, a new air filter box is designed with precisely positioned inlet ducts aimed at preventing air deformation and maintaining filter protection. An enduro-specific splash protector under the airbox prevents water or dirt from splashing up from the rear wheel, while the Twin Air filter and air filter support design feature a simple fail-proof mounting system for safe and accurate filter installation, ensuring the air filter is easily accessed, without tools, for fast track-side maintenance.

BENCHMARK LAP

TORQUE ABOUT IT

Engine

Let's start with the numbers; 49 hp, 43,8 Nm and 24.6 kg. This new 300cc 2-stroke powerplant not only brings a new choice into the E3 Enduro category, but remains the idea choice for Enduro riders wanting maximum power and torque at the least possible weight. Another reason why the KTM 300 XC-W engine sets the benchmark in the competitive Enduro E3 class and in hard enduro races all over the world.

FUELING SPEED

Throttle Body Injection

Forget TPI, the 2024 KTM 2-stroke Enduro models feature all-new electronically-controlled Throttle Body Injection - or TBI. The ECU, together with a new Keihin 39mm throttle body, calculates the ideal air-fuel mixture by constantly analyzing water temperature, air temperature, ambient pressure, and pressure within the crankcase, the rpm, and the throttle position to ensure the smoothest and most consistent power delivery in the most gnarly of enduro conditions.

ON THE CHARGE

BUILT TO BE THE BACKBONE